Viola Systems 2270 Dokumentacja

© 2009 VIOLA SYSTEMS LTD. WWW.VIOLASYSTEMS.COM APPLICATION NOTE APPLICATION NOTE V

10 / 15 ipaddr=10.10.10.10 7. If the IP address information in step 6 is correct (i.e. matches your Arctic configuration) then proceed to

11 / 15 arctic> saveenv Saving Enviroment to EEPROM... arctic> boot 3.6. Configuring the TFTP-server Change first the IP address of

12 / 15 Choose the LAN interface where the LAN cable is connected to. 5. Click the correct LAN interface icon with mouse's right butt

13 / 15 7. Set the values as follows: IP address as 10.0.0.1, netmask as 255.0.0.0 and default gateway as 10.10.10.10. This way your comput

14 / 15 3.7.1. Kernel upgrade 1. Download the kernel file using TFTP to Arctic. In arctic> prompt, enter the following command: tftp 20

15 / 15 The SSH keys can be generated by issuing the following command in Arctics command line (do not interrupt the boot but instead let th

2 / 15 Copyright and Trademarks Copyright 2009, Viola Systems Ltd. All rights to this document are owned solely by Viola Systems Ltd. All r

3 / 15 Table of contents TABLE OF CONTENTS ...

4 / 15 1. General 1.1. Purpose This document describes how to upgrade the firmware of certain Arctic products. See the next chapter for a

5 / 15 1.3. Target audience The target audience for this document is: • Field engineers • Customers' technical personnel 1.4. Conven

6 / 15 3.1.2. Arctic Gateway The Arctic Gateway products have two serial ports; one for console or application (selectable with a switch

7 / 15 3.3. Connecting the equipment 1. Verify that the power switch of Arctic is in “OFF” position. 2. Connect the power supply and Seri

8 / 15 3.5. Configuring the environment 1. If you’re using PuTTY, start by clicking the Serial button and change the Speed from "

9 / 15 5. Power on the Arctic. Log in as root user and type reboot at the command line, then right away press continuously any key, e.g.